Fishing sites for hooks and leashes, connection methods

28 strong knots for hooks and leashes

This article describes The strongest fishing units for hooks and leashes that can be applied in different situations. In their comments, you can leave feedback, in relation to certain nodes, as well as leave your recommendations on the technique of knitting various fishing rods.

Locker connections

To connect two fishing line, you can use one of the proposed methods:

Water assembly

Water assembly

It is easy to fit, quite reliable and famous for a long time. It is used to bind two fishing fishing, as well as the attachment of leashes. Known from 1425, which indicates its suitability.

Improved Clinch Knot

Advanced Clinch

Used to fasten the hook (with a ring) and a leash, in turn a swivel with a fishing line. As a rule, through this node, the monoins are connected, a diameter of up to 0.4 mm. The continuity of the connection reaches the value of 95%, but the strength falls if the node tackles on thick wire.

Nodes for fluorocarbon

Double Loop Junction (loop in loop)

loop in loop

This is a classic manner of fastening a leash to the main fishing line. Recently uses, first of all, leashes from fluorocarbon.

Bloody knot

Bloody knot

It is able to securely connect 2 fishing line, which has a different diameter. Differences in diameter can reach the values ​​of 40%, while the compound retains its strength by 90%.

Double sliding knot "Greenner" (Double Grinner Knot)

Double sliding knot

It is intended for binding a braid and monofilate fishing line, which have differences in caliber to 1/5.

Node "Albright" (Albright Knot)

In addition, it is suitable for a reliable connection of fishing fishing diameter. A knot, more complex in knitting technique, but it turns out very compressed and lung through the guide rings.

Nodes for shock leader

Shock leader - It is a segment of a fishing line, a large diameter, which is about 8-11 meters long. This segment has increased strength due to the large diameter, so special nodes are used to fasten it.

This connection point is better to fix the droplet superclone. This will not only strengthen the connection, but also be able to facilitate the process of passing it through the rod bandwidth. In the process of fishing, it is necessary to control the location of the node: it must be constantly from the bottom so that when casting the fishing line does not cling to it.

"Carrot" (Mahin Knot)

Carrot

It has small compact sizes, and with its help you can associate several monoings and a shock leader from the same fishing line.

KNOT "ALBRIGHT SPECIAL"

KNOT "ALBRIGHT SPECIAL"

Refers to a series of simple nodes, but reliably connecting the main fishing line with shock by the leader. It can be seen in the video closer above.

Blood Knot (Blood Knot)

Bloody knot

It is used when binding fishing razes, differing in thickness no more than twice. The reliability of the connection is 90% of the Fastener Fortress.

Hook knots

Node "Palomar"

Node "Palomar"

Actually all fishermen know. His destination is the fastening of the swivels to the main fishing line, as well as the combination of the twisters with hooks, which have ears. Unfortunately, his knitting requires that the fishing line is folded by half, and this increases the overall dimensions of the node.

"CROFORD" KNOT

"CROFORD" KNOT

Very often used to tie hooks having ears, as the strength of the node reaches 93%, from the fastener of the fishing line. It can be used on any logs (braid or monoinsca), where it shows excellent results, and it is simple to knit enough.

"Bnykoy" knot

"Bnykoy" knot

It becomes good on the monofilate fishing line, but it is not recommended to apply it on the braided.

"Rybatskaya Eight" and "Canadian G8"

"Rybatskaya Eight" and "Canadian G8"

Have good reliability when attaching a hook with an eye. If desired, such nodes can be easily untied.

"Capturing" Knot (Clinch)

"Capturing" Knot (Clinch)

Perfect for connecting a wicker fishing line and a hook made of thin wire. At the same time, this node is not recommended to be used on thick wire, including for attaching a rings.

Node "Stage"

Node "Stage"

It is intended to tie hooks having a spatula, not an eye. Hooks with a spatula, have an enhanced fortress, as they are created using forging methods. The reliability of such a node is sufficiently high, and corresponds to the stability of the fiber itself (that is, 100%).

TWISTED DROPPER LOOP Node

TWISTED DROPPER LOOP Node

With it, you can bind the hook to the main fishing line anywhere, but before this you need to form a loop on the fishing line. They are often used with the marine fishing of fish, when you need to very often change one hook to another or bait of one species on the bait of the other.

CENTAURI KNOT node

CENTAURI KNOT node

Does not affect the strength of the fishing line, so does not reduce the reliability of the connection.

"Hangman's KNOT"

"Hangman

It is one of the most reliable assemblies.

"SCAFFold KNOT"

"SCAFFold KNOT"

Refers to sea nodes, where you need to tie the hooks to a sufficiently tight fishing line.

"Snelling a Hook"

"Snelling a Hook"

A rather complicated node, but it is reliable and durable and is designed purely for knitting hooks to the fishing line.

"Turtle" knot

"Turtle" knot

It just knives, but has good strength, if you knit hooks with an eye. Perfection is suitable for snap-off Drop-Shot.

Spinning nodes

A knot for the hook, in which the fishing line is not tied around the priest, is great for attaching spinning bait. These include:

  • Node "Palomar";
  • "Step knot";
  • Cape method;
  • "CROFORD" KNOT;
  • double "clint" and "clincling" gripping;
  • Node "Twisted Dropper Loop";
  • SCAFFOLD KNOT node;
  • "Akuliy" node.

All listed nodes are described in detail earlier in this article.

Other types of nodes for spinning bait

Double "Stywedore"

Double "Stywedore"

The node has a reliability of about 100% and will fully hold any bait on the main fishing line.

"Eight"

"Eight"

The easiest node, with which the loop is formed, to which you can easily and quickly attach any bait. This method of attachment allows you to change the bait in a short time.

Node "Uni-Knot"

Node "Uni-Knot"

Durable and reliable and it is not difficult to tie it.

Many nodes presented in this article are quite multifunction. This suggests that they can be used in various situations and on various gears. In addition, many of them are very simply knit and to master the knitting of such nodes, just a few workouts.

This article describes The strongest fishing units for hooks and leashes that can be applied in different situations. In their comments, you can leave feedback on certain nodes

Locker connections

To connect two fishing line, you can use one of the proposed methods:

Water assembly

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It is easy to fit, quite reliable and famous for a long time. It is used to bind two fishing fishing, as well as the attachment of leashes. Known from 1425, which indicates its suitability.

Improved Clinch Knot

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Used to fasten the hook (with a ring) and a leash, in turn a swivel with a fishing line. As a rule, through this node, the monoins are connected, a diameter of up to 0.4 mm. The continuity of the connection reaches the value of 95%, but the strength falls if the node tackles on thick wire.

Nodes for fluorocarbon

Double Loop Junction (loop in loop)

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

This is a classic manner of fastening a leash to the main fishing line. Recently uses, first of all, leashes from fluorocarbon.

Bloody knot

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It is able to securely connect 2 fishing line, which has a different diameter. Differences in diameter can reach the values ​​of 40%, while the compound retains its strength by 90%.

Double sliding knot "Greenner" (Double Grinner Knot)

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It is intended for binding a braid and monofilate fishing line, which have differences in caliber to 1/5.

Node "Albright" (Albright Knot)

In addition, it is suitable for a reliable connection of fishing fishing diameter. A knot, more complex in knitting technique, but it turns out very compressed and lung through the guide rings.

Nodes for shock leader

Shock leader - It is a segment of a fishing line, a large diameter, which is about 8-11 meters long. This segment has increased strength due to the large diameter, so special nodes are used to fasten it.

This connection point is better to fix the droplet superclone. This will not only strengthen the connection, but also be able to facilitate the process of passing it through the rod bandwidth. In the process of fishing, it is necessary to control the location of the node: it must be constantly from the bottom so that when casting the fishing line does not cling to it.

"Carrot" (Mahin Knot)

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It has small compact sizes, and with its help you can associate several monoings and a shock leader from the same fishing line.

KNOT "ALBRIGHT SPECIAL"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Refers to a series of simple nodes, but reliably connecting the main fishing line with shock by the leader. It can be seen in the video closer above.

Blood Knot (Blood Knot)

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It is used when binding fishing razes, differing in thickness no more than twice. The reliability of the connection is 90% of the Fastener Fortress.

Hook knots

Node "Palomar"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Actually all fishermen know. His destination is the fastening of the swivels to the main fishing line, as well as the combination of the twisters with hooks, which have ears. Unfortunately, his knitting requires that the fishing line is folded by half, and this increases the overall dimensions of the node.

"CROFORD" KNOT

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Very often used to tie hooks having ears, as the strength of the node reaches 93%, from the fastener of the fishing line. It can be used on any logs (braid or monoinsca), where it shows excellent results, and it is simple to knit enough.

"Bnykoy" knot

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It becomes good on the monofilate fishing line, but it is not recommended to apply it on the braided.

"Rybatskaya Eight" and "Canadian G8"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Have good reliability when attaching a hook with an eye. If desired, such nodes can be easily untied.

"Capturing" Knot (Clinch)

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Perfect for connecting a wicker fishing line and a hook made of thin wire. At the same time, this node is not recommended to be used on thick wire, including for attaching a rings.

Node "Stage"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It is intended to tie hooks having a spatula, not an eye. Hooks with a spatula, have an enhanced fortress, as they are created using forging methods. The reliability of such a node is sufficiently high, and corresponds to the stability of the fiber itself (that is, 100%).

TWISTED DROPPER LOOP Node

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

With it, you can bind the hook to the main fishing line anywhere, but before this you need to form a loop on the fishing line. They are often used with the marine fishing of fish, when you need to very often change one hook to another or bait of one species on the bait of the other.

CENTAURI KNOT node

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Does not affect the strength of the fishing line, so does not reduce the reliability of the connection.

"Hangman's KNOT"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It is one of the most reliable assemblies.

"SCAFFold KNOT"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Refers to sea nodes, where you need to tie the hooks to a sufficiently tight fishing line.

"Snelling a Hook"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

A rather complicated node, but it is reliable and durable and is designed purely for knitting hooks to the fishing line.

"Turtle" knot

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

It just knives, but has good strength, if you knit hooks with an eye. Perfection is suitable for snap-off Drop-Shot.

Spinning nodes

A knot for the hook, in which the fishing line is not tied around the priest, is great for attaching spinning bait. These include:

  • Node "Palomar";
  • "Step knot";
  • Cape method;
  • "CROFORD" KNOT;
  • double "clint" and "clincling" gripping;
  • Node "Twisted Dropper Loop";
  • SCAFFOLD KNOT node;
  • "Akuliy" node.

All listed nodes are described in detail earlier in this article.

Other types of nodes for spinning bait

Double "Stywedore"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

The node has a reliability of about 100% and will fully hold any bait on the main fishing line.

"Eight"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

The easiest node, with which the loop is formed, to which you can easily and quickly attach any bait. This method of attachment allows you to change the bait in a short time.

Node "Uni-Knot"

The strongest fishing units for hooks and leashes
The strongest fishing units for hooks and leashes

Durable and reliable and it is not difficult to tie it.

Many nodes presented in this article are quite multifunction. This suggests that they can be used in various situations and on various gears. In addition, many of them are very simply knit and to master the knitting of such nodes, just a few workouts.

Each beginner fisherman faces the problems of tied hooks. Much depends on the selection of the node: equipment efficiency, discontinuous load and number of bite. Below is 12 ways to install the hook, which will be suitable not only by novice, but also experienced fishermen.

Deaf node

The easiest way to fasten the hook is a node based on a single loop. In order to tie it, you need to go to the hook in the ear of the hook, after which it should be laid out. Thus, the hook remains fixed on the fishing line, and the monophile is not given by a variety of overlaps. This node is perfect for mounting leashes, as well as for fastening swivels and carbines.

Deaf node

Bayonet knot

The best way fastening is suitable for a naval cord, as the fishing line will greatly slide, and the knot may not hold. For installation, it is necessary to make a loop on the Tsevier hook, two ends of which will look out in different directions. The node is wetted and neatly tightened. At the output, the connection is minimal to the diameter, which perfectly holds a thin wire hooks, as well as models with a spatula instead of a ear.

Bayonet knot

Canadian eight

For the monofil line, the original node is often used - Canadian eight. The end of the leiner is made in the eye from the outside, make a turn around the zevary, and then send it into the loop. The fastening obtained its name is due to the above-described eight, which goes at the time of installation. This node is easy to unleash, so the fisherman is not necessarily useing scissors and deform the thin steel of the hook.

Canadian eight

Fishing eight

An analogue of the previous method of fastening was invented by experienced fishermen. To use it, it is necessary to fold the fishing line by half and the resulting loop to skip into the ear. The free end is doing movement around the fishing line and returns to the loop, which is located along the hook.

Fishing eight

Turtle knot

An easy-to-use node appears to some kind of bakery product, so no one can describe the history of the origin of his name. The design fit simply: the fishing line is made in the eye, forming two adjacent loops. Around a large looping makes a turn and a free end in a small ring. The resulting node is tightened and raise the hook to the ear. This node is especially good when treated fishing. With it, the extra hook is fixed, which is above the Mormushka.

Turtle knot

California Knot

This attachment method resembles eight. He was invented at the end of the last century by California lovers of rest at the reservoir. For mounting, you need to fold the thread twice and skip through the ring. Next, you should make a turn around the cord and start the edge into the formed loop. The node reliably holds both a fishing line and a wicker, however, it has a little disadvantage - volumetricity.

California Knot

Step knot

For lovers of hooks with a spatula - this is a real find. The first few revolutions do around the hook, and the following - along the zevary and fishing line, tightening the node on the principle of the removal. The competent design holds a hook in a vertical position, which simplifies the ingestion of the nozzle fish.

Step knot

Salmon knot

One of the most reliable and effective is the compound that is widely used in fishing. The node covers the Tsevier hook from several sides, so its quality always remains at a high level. In addition, it is almost impossible to unleash the mount, any weakening only delays it. The free end of the fishing line is passed through the eye, unfold and make several revolutions around their axis, launching in a loop formed near the ear. Then the upper loop is lowered to the hook and also passes through it a free tip. The node must be tightened with all accuracy to achieve high-quality mounting. Complex design gives an indisputable result.

Salmon knot

Akuliy Knot

The simplest way to install a hook, in which the nozzle is freely moving along its axis. This method is popular with fishing in the thickness of water to active types of bait. Simple installation consists of a cord or monofilament through the eye, 5-6 revolutions around its axis and the final direction in the last loop.

Akuliy Knot

Gripping knot

Such a mount completely repeats shark node, but the end is displayed in the bottom loop. Installation is reliable when using any fishing line, as well as cord. Unlike its previous analogue, in the gripping unit, it is possible to significantly reduce the number of revolutions, thereby making it less voluminous.

Gripping knot

Tuntu knot

A specialized node for marine fishing attracted fans of hunting for large fish around the world. The original knitting method makes the knot truly unique. The mount is enhanced by the presence of two hinges on the ear instead of one. The fishing line runs along the goal from different sides, and then lowers down. The node is best used on models with a wide ear that is often used in a microjig.

Tuntu knot

Drawing

This type of fastening is used for mounting leashes to the main fishing line. It is successfully applied in spinning fishing with diversity snaps, as well as in the catch of white fish on the gum and bottom tackle. An ordinary node is made on the main fishing line and, without tightening, they skip leashes through two lower loops. Thus, it turns out a high-quality connection without excess load on the material.

Leaving knot

For a beginner fisherman, it suffices to master 2-3 reliable nodes that can be used in different situations. However, with experience, additional attachment methods will need, allowing to approach the installation of the gear more professionally. Each node must be delayed evenly to avoid twisting. Also, the attachments knit, in a mixture of water, otherwise the fishing line or cord may be damaged or simply delay not to the end. The moisture helps the material to lay tightly, therefore it is impossible to mount the node "on dry". The use of glue, which instantly grabs the surface, is an unforgivable error. Such a node breaks on the first-second fishing and will lead to the most responsible moment.

Fishing hubs. How to tie a hook.

The most common fishing site is "Palomar" ("Palomar") and its varieties.

"Palomar" ("Palomar")

The "Palomar" knot ("Palomar") is the most famous knot that all fishermen know. Despite the widespread opinion, for the braid, the Palomar knot ("Palomar") fits badly, since the rough surface of the braid will not give the node to completely delay. If you need to bind gloss to the braid, it is better to use another node. Fishing assembly Palomar "(" Palomar ") is surprisingly easy to fit, keeps up to 80% of the durability of the fishing line. Suite Palomar" ("Palomar") advise to tie the gloss and hook Many line manufacturers - this node is difficult to spoil in improper tying. For a thick fishing line Palomar "(" Palomar ") is not suitable.

Knot " Palomar " - characteristics
Types of fishing monofilament.
Tweight strength up to 80%
Assigning a node Bind gloss, hook to thin and medium fishing line.
Fishing nodes - how to bind a hook Palomar picture 1

Fold the fishing line in half. Skip the resulting loop in the ring of the hook.

Fishing nodes - how to bind the hook Palomar picture 2

Reincut the hook folded in half the hook as a regular knot.

Fishing nodes - how to bind the hook Palomar picture 3

Take the end of the loop on the zevyo hook.

Fishing nodes - how to bind a hook Palomar picture 4

Take the right hand hook left both end of the fishing line, and tighten the knot. Cut the end. You tied the hook by the Palomar node ("Palomar").

A knot for the Palomar braid ("Palomar") triple.

Fishing hub "Palomar" ("Palomar") triple. Triple node "Palomar" ("Palomar") - a quick easy-to-bind fishing unit. It is best suited to bind gloss to the braid. To tie a hook, the triple knot "Palomar" ("Palomar") is not suitable - after all, the line must pass through the ring of the hook six times! In this case, the tight turns of the fishing line are put on each other, which weakens the strength of the fishing site. For the same reason, it is better not to knit on Monolesca. When tied brilliantly to the wicker, the fishing knot "Palomar" ("Palomar") triple retains up to 85% of the strength of the fishing line

Knot "Palomar" ("Palomar") Triple - Characteristics
Types of fishing "network".
Tweight strength up to 85%
Assigning a node Bind gloss to the braid. Tail the jig head, bind the sinker, feeder.
Fishing nodes - how to tie a hook Palomar Triple Picture 1

Fold the braid in half. Skip the resulting loop in the ring of flashes.

Fishing nodes - how to bind the hook Palomar Triple Picture 2

Pull the loop of the braid in the ring flashed two more times.

Fishing nodes - how to tie a hook Palomar Triple Picture 3

Reinforcing the long end of the braid above brilliantly folded in half a wicker with a regular knot.

Fishing nodes - how to bind the hook Palomar Triple Picture 4

Skip gloss in the loop.

Fishing nodes - how to tie a hook Palomar Triple Picture 5

Take a loop on a wicker between the ring of brilliantly with a wicker coils and a simple knot from step 3.

Fishing nodes - how to tie a hook Palomar Triple Picture 6

Tighten the fishing knot for both ends of the braid. At the same time, make sure the loop from step 5 remained in place. Cut an excess braid. You got a node for the Palomar braid ("Palomar") triple.

The "blood" node and its various variations are widespread.

"Blood" knot

"Bloody" node is one of the most simple fishing units. A lot of different versions have been created on its base, which are great for tied hook. The best variations of the "blood" node see below. You can bind a hook or glitter to the monoinsca, it is not suitable for the braid. A double knot was created on the basis of the "blood" node for binding two fishing racks, which is characterized by a large compactness. About this read fishing knots - how to tie a fishing line to the fishing line

This fishing site is obliged to use this fishing unit to punish special sailors in English courts during Columbus. This node knitted the thickening-propeller at the end of the flap, which left bloody wounds on the back of the unfortunate.

"Bloody" knot - characteristics
Types of fishing monofilament.
Tweight strength up to 70%
Assigning a node Tie a hook or chop to fine or thick mononi.
Fishing nodes - how to bind the hook of the blood picture 1

Grind the line in the rings of the hook. Wake up the end around the main line 3-7 times depending on the thickness of the fishing line. The thinner of the fishing line, the more turns.

Fishing nodes - how to bind the hook. Blood Picture 2

Skip the fishing line in a loop that has been received near the rings of the hook.

Fishing nodes - how to bind the hook. Blood Picture 3

Tighten the knot for a short end. Cut the end of the fishing line, but not briefly. You tied the hook in the "blood" fishing knot.

"Locked blood"

Fishing knot "Locked blood". This node can be tied a hook to the monoinsca with a diameter of up to 0.6 mm. For a braid, it does not fit. The node is very universal, quickly and easily knit. You can bind the hook, gloss, loaded, metallic leashes with such a fishing unit.

The node retains up to 80% of the strength of the fishing line, which is quite fishermen, which do not catch the fish at the end of the tackle of tackle. The name of the node comes from the fact that the end of the fishing line presses the loop, which forms a kind of lock.

Knot "locked blood" - characteristics
Types of fishing monofilament.
Tweight strength about 80%
Assigning a node Bind gloss, driving, feeder to medium and thick fishing line.
Fishing nodes - how to bind the hook locked blood picture 1

Take the hook into the right hand. Grind the fishing line in the hook ear.

Fishing nodes - how to bind the hook locked blood picture 2

Mix the end of the fishing line around the main fishing line, as in the picture (3-7 revolutions, depending on the thickness of the fishing line).

Fishing nodes - how to bind the hook locked blood picture 3

Skip the fishing line in a loop that has been around the hook ear.

Fishing nodes - how to bind a hook locked blood picture 4

Skip the fishing line in the loop formed in the third step.

Fishing nodes - how to bind a hook locked blood picture 5

Pull the end of the fishing knuckle, tighten the fishing unit. Cut the tail. You tied a hook with a "locked blood" fishing knot.

"Blood beloved"

This node is often confused with the "locked blood" node. If you look at the video of both fishing units, you can not understand what the difference. They differ in the fact that the knot "locked blood" is tightened, flowing down the end of the fishing line in the loop down, towards the turns. And the knot "blood faded" is tightened, skipping the end of the fishing line into the loop from the bottom up, away from the hook. That is, this node, the end is skipped into the loop on the other side (see picture). At the same time, the end seems to be converted to the fishing loop, and gives greater friction force, warning slipping. This node can be tied a hook to a thin line, then it will have an advantage over the "locked blood" node. To the fishing line more than 0.2 mm better attach the hook by the "locked blood" knot. This node tackles only on the monolesk, for the braid, the node does not fit. "Thugged" preserves up to 80% of the durability of the fishing line.

"Blood beloved" - characteristics
Types of fishing monofilament.
Tweight strength up to 80%
Assigning a node Snipped with a murcling, a hook with an eye to a thin fishing line.
Fishing nodes - how to bind the hook of a blood faded picture 1

Skip the fishing line in a hook ring. Watch the main fishing line to the end of the fishing line 5 times.

Fishing nodes - how to bind the hook of a blood faded picture 2

Skip the end in a loop from the fishing line, formed near the rings of the hook.

Fishing nodes - how to bind the hook a blood beloved picture 3

Get the end of the fishing line down, and skip up the loop formed in the previous step.

Fishing nodes - how to bind the hook of a blood beloved picture 4

Tighten the fishing knot for the short end of the fishing line. Cut extra. You tied the hook by the fishing knot "Thunder".

"Clinch of the blood node"

This fishing knot can be tied a hook, gloss, leash, etc. The ear of the hook should be large enough so that you can skip the fishing line twice. The knot "Clinch of the blood" is suitable for thin and middle metal, does not suit the braid. The name "Klinch of the blood" was given to him for the fact that the end of the fishing line is delayed by a double loop, getting into a kind of clint.

"Clinch bloody node" - characteristics
Types of fishing monofilament.
Tweight strength 70-75%
Assigning a node Snip yourrigcut, a hook with an eye to a thin and mid-mononi.
Fishing nodes - how to tie a clinch hook Blood node picture 1

Take the hook into the right hand. Twice to last the fishing line in the hook ear.

Fishing nodes - How to bind a hook of a clinch of a bloody node picture 2

Mix the end of the fishing line around the main fishing line. 7-3 turns depending on the thickness of the fishing line.

Fishing nodes - how to bind a hook of a clinch of a bloody node picture 3

Skip the end of the fishing line in a double loop near the hook ear.

Fishing nodes - how to bind the clinch hook of a bloody node picture 4

Take one end of the fishing line in the right hand, the other in the left hand. Pull the ends of the line in different directions, tighten the fishing unit. Cut an excess fishing line. You tied the hook "clinch bloody" fishing site.

Node "Snood"

This fishing unit can be tied a hook with a spatula. The snoood node can be tied the hook both to the monoinsca and to the braid. Bind a hook to a thin or medium fishing line. The old rule is valid - the thicker the fishing line, the less turns. Limiting factor is the number of turns, which will make the fishing line. If there are less than five, the strength of the fishing site will significantly decrease.

And also a node "snood" you can bind a few hooks after each other - the tail of the fishing line goes down, and does not lose its strength. Node "Snood" - a very old option to tie the hook. They were tied a hook, who had no such luxury, like an eye. The node is quite durable, retains up to 95% of the strength of the fishing line.

"Snood" - characteristics
Types of fishing Mononite, braid.
Tweight strength 90-95%
Assigning a node Bring a hook with a spatula.
Fishing nodes - how to bind the hook Snood picture 1

If the hook has a bent ear, then the sale of the fishing line. If the eye is direct (or hook with a spatula), then the fishing line is not necessary. Make a loop from the fishing line as in the picture.

Fishing nodes - how to bind the hook Snood picture 2

Take your fingers right hand the edge of the loop and the hook for the eyelet (blade). Left hand turn around the coil hook - from 12 to 5, depending on the thickness of the fishing line.

Fishing nodes - how to bind the hook Snood picture 3

Take your left hand hook for Tsevyu. Right hand pull the fishing line, leaving the side of the Ear, and tighten the fishing knot. You tied the hook by the fishing knot "Snood".

Sliding Snood

This fishing unit is used when you need to tie a hook to the fishing line above the already tied hook without using a leash. So you can tie a hook on the float fishing rod, donke and other fishing gear. In this case, the node is obtained by sliding, and the leashes are not confused (they are not).

A feature of this node is that the hook is tied by an additional fishing line, the main fishing line is only grabbed by this node, and the assembly of the main fishing line does not affect the "Sliding Snood". The hook can be tied to the fishing line of any thickness. This node is based on the "Snood" node.

Fishing knot " Sliding Snood. " - characteristics
Types of fishing Mononite, braid.
Tweight strength The strength of the fishing line does not affect.
Assigning a node Bind an extra hook without using a leash.

Fishing nodes - how to bind the hook. "Sliding Snood" picture 1

Fishing nodes - How to bind a hook Sliding snood picture 1

Take the hook for the ear in the left hand. Make a loop from auxiliary fishing line as in the picture.

Fishing nodes - how to bind the hook. "Sliding Snood" picture 2

Fishing nodes - How to bind hook Sliding snood picture 2

Make this loop 8 revolutions clockwise around yourself.

Fishing nodes - how to bind the hook. "Sliding Snood" picture 3

Fishing nodes - how to bind the hook Sliding snood picture 3

Attach the main fishing line to the hook.

Fishing nodes - how to bind the hook. "Sliding Snood" picture 4

Fishing nodes - How to bind the hook Sliding snood picture 4

Make an extra line 5 more revolutions.

Fishing nodes - how to bind the hook. "Sliding Snood" picture 5

Fishing nodes - How to bind the hook Sliding snood picture 5

Take the hook with the right hand for Tsevy. Left hand pull for an extra line, tighten the fishing knot. You tied the hook with a fishing site "Sliding Snood".

Fishing nodes - how to bind the hook. "Stupid Leash"

Fishing knot "Stupid leash"

Fishing knot "Stupid leash" . Despite the name, this fishing unit is not so stupid. It saves up to 90% of the durability strength, and excellently suitable for tied hook. Unlike the "Snood" fishing unit, the fisherman "stupid leash" can be tied a hook with only an eye - the tail of the fishing line is pressed under it. As well as the fishing unit "Snood" Fishing knot "Stupid leash" is suitable for fine and medium fishing line. The number of turns must be at least seven.

Fishing knot " Stupid leash " - characteristics
Types of fishing Mononite, braid.
Tweight strength 85-90%
Assigning a node Bind the hook with a ring to a thin and medium fishing line (braid or mononi).

Fishing nodes - how to bind the hook. "Stupid Leash" picture 1

Fishing knots - how to bind the hook stupid leash picture 1

Take the hook with your fingers of the left hand. Grind the fishing line in the hook ear. Turn the fishing line back, and grab the right hand the resulting loop.

Fishing nodes - how to bind the hook. "Stupid Leash" picture 2

Fishing nodes - how to bind the hook stupid leash picture 2

Left hand wrap the line around the hook of the cooler to the turn towards the ear. It is necessary 12-7 turns depending on the thickness of the fishing line.

Fishing nodes - how to bind the hook. "Stupid Leash" picture 3

Fishing nodes - how to bind the hook stupid leash picture 3

Flashing between the body of the hook and the fishing line.

Fishing nodes - how to bind the hook. "Stupid Leash" picture 4

Fishing nodes - how to bind the hook stupid leash picture 4

Pull the long line, tighten the fishing knot. Slide the knot to the hook eater. Cut the tail. You tied the hook by the fishing knot "Stupid Leash".

Fishing nodes - how to bind the hook. "Marshall trap"

Fishing knot "Marshall trap"

Fishing knot "Marshall trap" . This is a very simple fishing knot, well suits to tie a hook on fishing, when there is no time to mess with fishing gear. This fishing unit can be tied a hook or gloss to a fishing line at least 0.2 mm with a diameter. Thin thin fishing line will slip out of the fishing site. The strength of the fishing unit "Marshall trap" to 75% of the durability of the fishing line.

Fishing knot " Trap Marshall " - characteristics
Types of fishing Mononite, braid.
Tweight strength 75-80%
Assigning a node Tie a hook to a fine and medium fishing line.

Fishing nodes - how to bind the hook. "Marshall trap" picture 1

Fishing nodes - how to bind the hook trap Marshall picture 1

Make a loop from the fishing line. The end of the fishing line tie to the main fishing line with a regular knot, as in the picture.

Fishing nodes - how to bind the hook. "Marshall trap" picture 2

Fishing nodes - how to bind the hook trap Marshall picture 2

Shoot the loop in the Hook Ushko.

Fishing nodes - how to bind the hook. "Marshall trap" picture 3

Fishing nodes - how to bind the hook trap Marshall picture 3

Put the loop on the hook zevyo.

Fishing nodes - how to bind the hook. "Marshall trap" picture 4

Fishing nodes - how to bind the hook trap Marshall picture 4

The end of the fishing line skip into the loop.

Fishing nodes - how to bind the hook. "Marshall trap" picture 4

Fishing nodes - how to bind the hook trap Marshall picture 5

Pull the brief end of the fishing end, and tighten the simple knot formed in the 1st step. Now pull the long end of the fishing line, the node will move to the hook. Cut the tail. You tied the hook by the fishing knot "Marshall trap".

Fishing nodes - how to bind the hook. "World Fair"

Fishing Knot "World Fair"

Fishing Knot "World Fair" ("WORLD FAIR KNOT") The invention Gary Martin, who gave him such a name. The Fishing Knot "The World Fair" is one of the simplest, all the same ways to bind the hook, spinning to the wicker and the monoze. "World Fair" Relatively new fishing knot, and therefore is little known. This fishing unit has 65% of the gap strength and is kept equally well on the braid, and on the monolesca with any diameter. The Hook Hooks must be great enough to skip it folded in half a fishing line. This fishing unit is very compact.

Fishing knot " World Fair " - characteristics
Types of fishing monofilament
Tweight strength 65-70%
Assigning a node Bind the mirosis, the hook to any diameter and the type of fishing line.

Fishing nodes - how to bind the hook. " World Fair »Picture 1.

Fishing Nodes - How to Bind Hook World Fair Picture 1

Fold the fishing line in half. Clean the hook.

Fishing nodes - how to bind the hook. " World Fair »Picture 2.

Fishing Nodes - How to Bind Hook World Fair Picture 2

Take the loop in the opposite direction so that the semiring covers the folded twice.

Fishing nodes - how to bind the hook. " World Fair »Picture 3.

Fishing nodes - how to bind the hook World Fair picture 3

Slide the end of the fishing line between double fishing racks.

Fishing nodes - how to bind the hook. " World Fair »Picture 4.

Fishing Nodes - How to Bind Hook World Fair Picture 4

Now thread the end of the fishing line in a loop formed by a single fishing line in the previous step.

Fishing nodes - how to bind the hook. " World Fair »Picture 5.

Fishing nodes - how to bind the hook World Fair picture 5

Pull at the same time for the main line, and the end of the fishing line. You tied the hook by the fishing knot "World Fair".

Fishing nodes - how to bind the hook. " Leash »

Fishing knot " Leash »

Fishing knot "Leash" Good fishing knot to tie a hook with a spatula or with an eye. The knot is obtained quite strong up to 95% of the strength of the fishing line. This fishing unit is also suitable for monooles, and for a braid.

Fishing knot " Leash " - characteristics
Types of fishing Mononite, Plet
Tweight strength up to 95%
Assigning a node Tie a hook with a spatula

Fishing nodes - how to bind the hook. " Leash »Picture 1.

Fishing nodes - how to bind a hook leash picture 1

If the hook has a bent ring, then skip the fishing line into it. Bring the line to the bend of the hook, and turn to the ring. Get loop.

Fishing nodes - how to bind the hook. " Leash »Picture 2.

Fishing nodes - how to bind a hook leash picture 2

Watch the hook to the end of the fishing line through the loop from the previous step (10-5 turns depending on the thickness of the fishing line).

Fishing nodes - how to bind the hook. " Leash »Picture 3.

Fishing nodes - how to bind a hook leash picture 3

Pull the line for both ends in different directions and tighten the fishing knot. Cut the surplus line. You tied a hook with a fishing knot "Leash".

Fishing nodes - how to bind the hook. "Penny"

Fishing knot "Pens"

Fishing knot "Pens" . Fishing hook "Pens" can be quickly tied a hook on fishing. It is suitable for fine and medium (up to 0.5 mm) monoinsca. For a braid, it is better to use other fishing units. The strength of this fishing unit is up to 70% of the durability of the fishing line.

Fishing assembly "Pens" - characteristics
Types of fishing monofilament.
Tweight strength up to 70%
Assigning a node Snip yourrigcut, a hook with an eye to a thin and mid-mononi.

Fishing nodes - how to bind the hook. "Pens" picture 1

Fishing nodes - how to bind the hook Pence picture 1

Take a hook in your left hand. Skip the fishing line in a hook ring. The end is drowned, and pull your right hand as in the picture.

Fishing nodes - how to bind the hook. "Pens" picture 2

Fishing nodes - how to bind the hook Pens picture 2

Put the main fishing line on the index finger of the right hand, and capture them with a woodwork forming an arc. Pull over to the loop formed.

Fishing nodes - how to bind the hook. "Pens" picture 3

Fishing nodes - how to bind the hook Pens picture 3

Loop, obtained in the previous step, make the turn around the main fishing line. Then make another same turn.

Fishing nodes - how to bind the hook. "Pens" picture 4

Fishing nodes - how to tie a hook Pens picture 4

Cover the end of the loke of the loop from the previous step.

Fishing nodes - how to bind the hook. "Pens" picture 5

Fishing nodes - how to bind the hook Pens picture 5

Pull alternately both end of the fishing line and tighten the node. You tied the hook by the Fishing Knot "Pens".

Fishing nodes - how to bind the hook. "Loop Duncana"

Fishing knot "Loop Duncana"

Fishing knot "Loop Duncana" - Little compact fishing unit, allows you to bind the hook, gloss to the wicker and a small or medium diameter monoolec. This fishing unit is formed by turns, which are clamped in a loop, and retains up to 80% of the durability of the fishing line.

Fishing knot "Loop Duncana" - characteristics
Types of fishing Mononite, braid.
Tweight strength up to 80%
Assigning a node Snip the mirosis, hook or gloss to fine and medium fishing line.

Fishing nodes - how to bind the hook. "Loop Duncana" picture 1

Fishing nodes - How to bind the hook Duncana loop picture 1

Make a ring on the fishing line as in the picture. Skip the end of a fishing line in a hook ring.

Fishing nodes - how to bind the hook. "Loop Duncana" picture 2

Fishing nodes - how to bind the hook Duncan's loop picture 2

Wrap the main fishing line, passing the end through the ring from the previous step 3-5 times.

Fishing nodes - how to bind the hook. "Loop Duncana" picture 3

Fishing nodes - how to bind a hook Duncan's loop picture 3

Tighten the fishing knot for a short end. Cut the surplus line. You tied a hook by the fishing knot "Loop Duncan".

Fishing nodes - how to bind the hook. "Greenner" ("Grinner")

Fishing knot "Greenner"

Fishing knot "Greenner" Widely known worldwide in many different names. The fishing unit "Greenner" allows you to bind the hook to the monoinsca, it will not be born for a braid. This fishing unit is suitable for a wide range of fishing razes from thin to the fattest, retains up to 80% of the strength of the fishing line. The number of turns should be from 5 to 3, the thicker of the fishing line, the less.

Fishing Knot "Greenner" - Characteristics
Types of fishing monofilament.
Tweight strength up to 80%
Assigning a node Bind the mirosis, a hook to thin or thick monoings.

Fishing nodes - how to bind the hook. "Greenner" picture 1

Fishing nodes - how to bind the hook Greenner picture 1

Take a hook in your left hand. Thread the line in the rings of the hook, and take back and take her with your fingers right. Release the hook - now you will knit the fishing knot with your left hand. Stretch the line towards the hook, it turns out the loop.

Fishing nodes - how to bind the hook. "Greenner" picture 2

Fishing nodes - how to bind the hook Greenner picture 2

Wrap the main fishing line, passing the end through the loop, which was obtained in the previous step 3-5 times.

Fishing nodes - how to bind the hook. "Greenner" picture 3

Fishing nodes - how to bind the hook Greenner picture 3

Pull the short end. The knot will be covered on the main logster above the hook.

Fishing nodes - how to bind the hook. "Greenner" picture 4

Fishing nodes - how to bind the hook Greenner picture 4

Smoothly pull for the main fishing line. The node is drawn to the hook. Cut an excess fishing line. You tied the hook of the Greenner fishing unit.

Fishing nodes - how to bind the hook. "Pitzen"

Fishing knot "Pitzen"

Fishing knot "Pitzen" Allows you to tie a hook or gloss to monoinsca. This is one of the best fishing units in terms of compactness / durability ratio. It knits on a fishing line of any diameter, while maintaining up to 90% of the strength of the fishing line. Fishing knot "Pitzen" quickly knits - you need only 3 turns, regardless of the diameter of the fishing line.

Fishing knot "Pitzen" - characteristics
Types of fishing monofilament.
Tweight strength up to 90%
Assigning a node Reliably tie a hook, loaded, twig.

Fishing nodes - how to bind the hook. "Pitzen" picture 1

Fishing nodes - how to bind the hook Pitzen picture 1

Clean the fishing line in the hook ring and stretch along the main line.

Fishing nodes - how to bind the hook. "Pitzen" picture 2

Fishing nodes - how to bind the hook Pitzen picture 2

Mock 3 turns on a dual fishing line toward the hook or brilliance.

Fishing nodes - how to bind the hook. "Pitzen" picture 3

Fishing nodes - how to bind the hook Pitzen picture 3

Skip the fishing line to the far from the hook (glitter) loop.

Fishing nodes - how to bind the hook. "Pitzen" picture 4

Fishing nodes - how to bind the hook Pitzen picture 4

Tighten the fishing knot for a short end and cut it out. You tied a hook (glitter) by the fishing knot "Pitzen".

Fishing nodes - how to bind the hook. "Turle"

Fishing hub "Turle"

Fishing knot "Turle". This fishing unit can be tied a hook to the monoinsca. For a braid, this fishing unit will not go. The knot knives quickly, allows you to tie a hook on fishing with a shortage of time. The Fishing Knot "Turle" has strength up to 80%. The rings of the hook should be large enough so that you can skip the fishing line twice.

Fishing hub "Turle" - Characteristics
Types of fishing monofilament.
Tweight strength up to 80%
Assigning a node Quickly tie a hook or driving to a thin or medium fishing line.

Fishing nodes - how to bind the hook. "Turle" picture 1

Fishing nodes - how to tie a hook Turle picture 1

Skip the fishing line in a hook ring. Cut the hook with the end of the fishing line, and skip the fishing line in the ring on the other side.

Fishing nodes - how to bind the hook. "Turle" picture 2

Fishing nodes - how to tie a hook Turle picture 2

The end of the fishing line tie the usual double knot to the main fishing line.

Fishing nodes - how to bind the hook. "Turle" picture 3

Fishing nodes - how to tie a hook Turle picture 3

Tighten the simple knot from the previous position by pulling in a short end. Pull the long end and pull the simple knot to the hook. You tied the hook to the "Turle" fishing knot.

Fishing nodes - how to bind the hook. "Big finger knot"

Fishing knot "Node of the thumb"

Fishing knot "Node of the thumb" - Effective knot to tie a hook, gloss, drove donkes to thick monoinsca. The Fishing Knot of the "thumb" retains approximately 75 percent of the durability of the fishing line, and relatively easily tied up on the thick and rigid fishing racks. The name of the fishing unit received for the fact that turns first form on the thumb, and then removed on the line. When tightening the fishing site, you need to be neat and watching the turns to go around and were tightened.

"Big finger node" - characteristics
Types of fishing monofilament.
Tweight strength 70-75%
Assigning a node Tie a hook or loaded to medium or thick monoings.

Fishing nodes - how to bind the hook. "Big finger node" picture 1

Fishing nodes - how to bind the hook node of the thumb picture 1

Skip the fishing line in the hook ear, spinning or driving, and take back.

Fishing nodes - how to bind the hook. "Big Finger Node" picture 2

Fishing nodes - How to bind the hook node of the thumb picture 2

Take both ends of the fishing line in the left hand. Short end wrap the thumb three turns. Skip the end of the fishing line back through the loop.

Fishing nodes - how to bind the hook. "Big Finger Node" picture 3

Fishing nodes - how to bind the hook node of the thumb picture 3

Alternately remove the turns on the line.

Fishing nodes - how to bind the hook. "Most of the thumb" picture 4

Fishing nodes - how to bind the hook node of the thumb picture 4

Tighten the fishing knot for the main line, tighten the hook knot. Cut the end of the fishing line. You tied the hook (glitter, loaded) the "thumb" fishing knot.

Fishing nodes - how to bind the hook. "Nail with loop"

Fishing knot "Nail with loop"

Fishing knot "Nail with loop" Designed to tie the hook, drove docks to the main fishing line or shock leader. Allows you to get a neat knot on a very thick fishing line. Suitable for both monofilament and braids. The form keeps well, while maintaining up to 75% of the strength of the fishing line. This node is an augmented loop fishing knot "Nail" to bind to the fishing line, hence the name. An additional subject like a nail or tubule for the tying of this fishing unit is not needed.

Fishing knot "Nail with loop" - characteristics
Types of fishing monofilament.
Tweight strength up to 75%
Assigning a node Tie a hook, loaded, feeder to a thick or medium fishing line.

Fishing nodes - how to bind the hook. "Nail with loop" picture 1

Fishing nodes - how to tie a clinch hook Blood node picture 1

Skip the fishing line in a rings of a hook or sinked and form a loop above the ring.

Fishing nodes - how to bind the hook. "Nail with loop" picture 2

Fishing nodes - How to bind a hook of a clinch of a bloody node picture 2

Make the second loop from the hook side (loaded), as shown in the picture. Press your thumb to the palm to the palm place of the junction of the loaf, formed by two loops with the opposite side of the hook (loaded) side.

Fishing nodes - how to bind the hook. "Nail with loop" picture 3

Fishing nodes - how to bind a hook of a clinch of a bloody node picture 3

A fishing line, forming a large loop, obtained in step 2, make 4 turns around a small loop of the 1st step, each time I miss the hook (loaded) inside a large loop.

Fishing nodes - how to bind the hook. "Nail with loop" picture 4

Fishing nodes - how to bind the clinch hook of a bloody node picture 4

Tighten the fishing knot first for the end, then for the main line. Cut an excess fishing line. You tied a hook or loaded the docks by the "Nail" fishing knot with a loop.

Fishing nodes - how to bind the hook. "Cat foot"

Fishing knot "Cat foot"

Fishing knot "Cat foot" - A good way to tie a hook without unnecessary loops. Fisted fishing knot is somewhat strange. Requires accuracy when tightening the node, watches the turns to lay exactly. Such a fishing unit can be knitted on the monofilament and the braid of any diameter. The strength of the correctly knotted fishing unit "Cat foot" will be up to 85%.

Fishing knot "Cat foot" - characteristics
Types of fishing monofilament, «network ».
Tweight strength up to 85%
Assigning a node Bring a hook or driving to any fishing line.

Fishing nodes - how to bind the hook. "Fat foot" picture 1

Fishing nodes - how to bind the hook of a cat paw pictures 1

Fold the fishing line in half. Skip the loop to the hook ear.

Fishing nodes - how to bind the hook. "Fat foot" picture 2

Fishing nodes - how to bind the hook of a cat paw picture 2

Take a loop on the hook and remove the main fishing line.

Fishing nodes - how to bind the hook. "Cat foot" picture 3

Fishing nodes - how to bind the hook of a cat paw picture 3

Rotate the hook inside the loop 3-5 times clockwise.

Fishing nodes - how to bind the hook. "Fat foot" picture 4

Fishing nodes - how to bind the hook of a cat paw picture 4

Take both end of the fishing line and tighten the fishing knot. Cut any end. You tied the hook by the fishing knot "Cat foot".

Fishing nodes - how to bind the hook. Lindemann ("Lindeman")

Fishing knot "Lindemann"

Fishing knot "Lindemann" - One of the best ways to tie a hook or gloss to a wicker or monofilament. It is best suited for small and medium diameter fishing. Thicatles of the fishing knot will be hard to tie. The rings of the hook should allow the fishing line twice into it. The fishing unit "Lindemann" has greater strength, keeping up to 95% of the durability of the fishing line.

Fishing Knot "Lindemann" - Characteristics
Types of fishing monofilament, «network ».
Tweight strength up to 95%
Assigning a node Reliably bind the hook, loaded.

Fishing nodes - how to bind the hook. Lindemann picture 1

Fishing nodes - how to bind the hook Lindemann picture 1

Skip the fishing line in a hook or brillicks. Make a big loop toward the main fishing line. Once again, skip the fishing line in the ring.

Fishing nodes - how to bind the hook. "Lindemann" picture 2

Fishing nodes - how to bind a hook Lindemann picture 2

Inside the loop wrap the end of the main fishing line, and the loop forming the loop is 3-5 times. The thinner of the fishing line, the more turns.

Fishing nodes - how to bind the hook. Lindemann picture 3

Fishing nodes - how to bind a hook Lindemann picture 3

Tighten the fishing knot for the short end of the fishing line. Cut the tail. You tied the hook in the Lindemann fishing knot.

How to tie a hook - Fishing knot "Rebeca"

Fishing knot "Rebeca"

Fishing knot "Rebeca" Simple but rather effective way to bind the hook. Suitable for monofilament and for a wicker. The strength of this fishing unit is up to 70%.

Fishing knot "Rebeca" - characteristics
Types of fishing monofilament, «network ».
Tweight strength up to 70%
Assigning a node Bring a hook to a thin or medium fishing line.

Fishing nodes - how to bind the hook. "Rebeca" picture 1

Fishing nodes - how to bind the hook of the Rebeca picture 1

Grind the line in the rings of the hook. Get the line on the hook 4 times.

Fishing nodes - how to bind the hook. "Rebeca" picture 2

Fishing nodes - how to tie a hook of a rebeid picture 2

Skip the fishing line again in the Hook UCHO, but in the opposite direction from the fishing line, missed in the ring from the previous step.

Fishing nodes - how to bind the hook. "Rebeca" picture 3

Fishing nodes - how to bind the hook of the Rebeca picture 3

Take the hook with your left hand. With fingers right hand torn the coils from the hook on the main fishing line.

Fishing nodes - how to bind the hook. "Rebeca" picture 4

Fishing nodes - How to bind the hook of Rebeca picture 4

Tighten the fishing knot, cut the surplus of the fishing line. You tied the fishing knitting knot "Rebeca".

Fishing nodes - how to bind the hook. "Centaurus"

Fishing knot "Centaur"

Fishing hub "Centaur". One of the best fishing units to tie a hook, gloss or driving to monofilament or wicker. This fishing unit is suitable for a wide range of fishing racks, easily knits and guaranteed retains at least 90% of the durability strength. It is worth learn to knit the fisherman "Centaur" fishing unit.

Fishing Knot "Centaur" - Characteristics
Types of fishing monofilament, «network ».
Tweight strength about 90%
Assigning a node Tie a merchics, hook or sinked to the fishing line of any diameter.

Fishing nodes - how to bind the hook. "Centaur" picture 1

Fishing nodes - how to bind the hook Centaur picture 1

Grind the line in the rings of the hook. Screw the end of the fishing line around the main fishing line 3 times.

Fishing nodes - how to bind the hook. "Centaur" picture 2

Fishing nodes - how to bind a hook Centaur picture 2

Throw the end of the fishing line to the hook, and stretch it inside the turns in the direction of the main fishing line.

Fishing nodes - how to bind the hook. "Centaur" picture 3

Fishing nodes - How to bind a hook Centaur picture 3

Tighten the fishing knot for a short end. Cut an excess fishing line. You tied the hook by the fisherman "Centaur".

Bind the hook to the fishing line so that the node is easy to tie, but at the same time maintained the strength of the fishing line on the gap, not such an easy task as it may seem at first glance. For thousands of years, fishermen came up with dozens, if not hundreds, ways to bind the hook to the fishing line. Modern fisherman remains only to choose one of them.

When choosing a node for tieting the hook, the fisherman must take into account the type of hook used, the material from which the fishing line is made, its diameter, and the approximate size of the fish, which is expected to catch.

In my article, we give all the main fishing units that are used to tie the hook to the fishing line. Choose one or two knots for yourself, try typing them at home, and when you remember the principles of their tying, you can apply them on real fishing.

How to tie a hook to the fishing line

To properly tied the hook to the fishing line, the fisherman should take into account the influence of the material of the fishing line and its shape to choose from the corresponding node. When tying a hook to the fishing line, the diameter of the fishing line should be taken into account, its rigidity and its limiting discontinuous load.

Nylon, fluorocarbonic and woven fishing line requires the use of different methods of typing and different nodes.

For example, the use of a node intended for attaching a hook to a wicker fishing line, on a nylon fishing line, most likely leads to the weakening of the node, its unleashing and loss of trophy.

The force with which the node is delayed also has a serious effect on the ultimate strength of the node. Nylon and fluorocarbon as a result of friction when tightening the node are subject to fagots and complete loss of strength. To reduce overheating of the fishing line from friction when tightening the assembly, the fishing line is necessarily wetted with water, you can simply saliva.

Wicker fishing racks are susceptible to abrasion and subsequent rupture in friction places. For this reason, self-drawing nodes should not be used with wicker woods, especially if the fishing is expected to catch.

The basic principle of knitting any fishing unit consists in minimizing the deformation of the structure of the material of the fishing material, for which the node is formed from a plurality of loops and rings that duplicate each other. This is a plurality of loops and rings, prevents the weakening and self-disconnecting of the node, increasing its strength and reliability.

Hook nodes with an eye

The hook with an eye has a ring at the top of the hook, the diameter of which is most often equal to the wire diameter of which the hook is made. The hook with an eye is currently more popular among fishermen than a hook without an ears with a spatula. The ear of the hook can be snapped with a community or can be simply pressed to the census of the hook, without a rigid connection between them. Before tieting the hook to the fishing line, you should carefully examine the Hook UCHO, so that there are no sharp edges and burrs on it, and if they have them should be removed by Nadfil. When choosing and buying fishing hooks in the store, you should give preference to high-quality hooks of well-known firms.

Knock Klinch

The clinch node is the most popular among the fishermen by a node for tosing a hook to the fishing line. The clinch node is characterized by high strength, the strength of the node on the gap reaches a value of 85% of the explosive load of the fishing load. The clinch node is well suited for tosing a small and medium-sized monofilament fishing line to the hook.

Knock Klinch

In order to tie a line to the hook with the clinchen node, do the following:

  • Passenge in the ear of the hook running end of the fishing line
  • Wrap the running end of the fishing line around the root from 4 to 6 times.
  • Thread the end of the loop through which the hook ear is passed.
  • Moisten the line and tighten the knot.

The clinch node is undesirable to use in the following cases:

  • For tieting the fishing line to the hook having a big diameter of the ear
  • With a diameter with a diameter of more than 0.4 mm
  • With a wicker leaf

Clinch Superior Knot (Improved Clincch)

Superior clinch is very similar on the principle of tying on the usual clinch knot. The node is characterized by high strength, the strength of the node on the break comes to 98% of the explosive load of the fishing load. The clinch node is well suited for tosing a small and medium-sized monofilament fishing line to the hook.

Node Superior Clinch

In order to tie a line to the hook with the clinchen node, do the following:

  • Passenge in the ear of the hook running end of the fishing line
  • Wrap the running end of the fishing line around the root from 6-7 times.
  • Thread the end of the loop through which the hook ear is passed.
  • Again the tip of the fishing line in the reverse loop resulting as a result of the bend.
  • Moisten the line and tighten the knot.

Palomar node

Palomar knot is one of the most popular and easy-to-tie fishing units. With the help of it, not only hooks, but also brilliantly, carabiners, swivels and other elements of fishing equipment are tied to the fishing line. The most well node is suitable for use with monophilic wood. The strength of the node on the gap is 90% of the explosive strength of the fishing strength. Similar to the Palomar node is the Californian node.

Knot Palomar

In order to tie a line to a hook with a node Palomar, do the following:

  • The end of the fishing line is folded in half and do a dual fishing line in the hook ear
  • Out of the resulting loop envelope the main fishing line and in the resulting loop, we produce a double end of the fishing line
  • We skip the hook between the dual-end logs and tighten.

In addition to the usual node, Palomar, there are knots of a double and triple palomar, their difference from the main node is that the loop turns around the main fishing line is not one, but two or three times.

Uni Knot (Grinner)

The fishing knot "Yuna" is a good alternative to the famous Fishing site "Clinch". The multifunctional node of Yuni was invented by a Norman Duncan. UNI node is also known as Greenner, Hower. The name of the UNI node name occurred from the English word Universal, which is translated as "universal".

node units

Fishing knot "Yuna" can be used for:

  • For tied hooks, baits, carabiners, fasteners to the fishing line
  • For bringing the fishing line to the spool spool
  • To bind two ends of the fishing line

The "Yuni" knot can be used both with monophilic and wicker woods. The strength of the node on the gap when tied to the hook's hand is about 81% of the explosive strength of the fishing strength. When connecting two fishing line, the strength of the node is somewhat reduced and is 73-75% of the explosive strength of the fishing strength. The strength of the node, when using a wicker line depends on its thickness and the shape of its cross section and is in the range from 65 to 73% of the explosive strength of the fishing strength.

The fixation of the node "Yuni" occurs after it is tightened and depends on the degree of tension of the fishing line. During the tightening, the coils of the node "Yuni" are changing in places, the internal coils become outer and vice versa. When tightening the node, the fishing line must be saved, it will save its strength and structure.

In order to tie a line to a hook with the help of the "Yuna" node, follow these steps:

  • Grind the fishing line through the hook ear
  • Free end of the fishing line fold into the loop and press it to the main fishing line
  • The end of the loop wrap 5-6 times two folded filaments
  • Clean the free end of the fishing line through the loop
  • Move the resulting node tight to the hook
  • Moisten the line and tighten the knot finally
  • Cut the extra end of the fishing line

Node spindle

The spindle knot is very reliable, well withstanding the load, a unprecedented node. The node is suitable for monophilic, fluorocarbon and wicker fishing fishing oil. The strength of the node on the gap is 85% of the explosive strength of the fishing strength. A feature of the spindle node is, the fact that he fit on the Tsevier hook.

Node spindle

In order to tie the line to the hook with the node of the spindle, do the following:

  • Grind the fishing line through the hook ear
  • Clean the free end of the fishing line along the hook
  • Make the resulting loop 4-5 revolutions around the cable hook
  • End of fishing line grip in loop
  • Moisten the line and tighten the knot
  • Cut the extra end of the fishing line

How to tie a hook to the fishing line with a deaf node

The deaf node is the easiest in the taled by the fishing knot. This node does not deform the fishing line and therefore well retains its discontinuous strength. The deaf node is used not only to tie the fishing line to the hook, but also for tieding loads and other elements of the fishing snap.

Deaf node

In order to tie a line to the hook with a deaf node, do the following:

  • Fold the fishing line twice and do through the hook ear
  • The resulting loop we put on the tip of the hook
  • Tighten the knot tightly

Shone knot

The bayonge node is an unlocking node that keeps the load well and easily unleashed if necessary. Initially, the pin knot was used to tie the ships to the communions, then began to be used not only by sailors, but also fishermen, and climbers.

The bayonet assembly is reasonable to use in those situations when a strong thrust acts on the rope or rope, for example, when towing a car or to fix the safety rope. The node is well suited for tosing a hook to a wicker fishing line, the strength of the bayonge node on the gap is about 90% of the explosive strength of the fishing strength.

bayonet knot

The bayonet assembly consists of two semistes, it is important to properly tie the second half-hidden, otherwise the node will delay.

In order to bind the line to the hook with a bayonet assembly, do the following:

  • Take the end of the fishing line through the hook ear, turn it around the goal and start the end to the resulting loop.
  • We repeat the previous operation again, for this, the end of the fishing line is made by one more turn around the zevye and start the end of the fishing line in the resulting loop.
  • We make a tightening node.

Node Fisherman Eight

The fishing eight is a classic fishing unit, not the easiest in the tie, but at the same time very reliable. The strength of the node "Rybatskaya Eight" on the gap is about 90% of the explosive strength of the fishing strength.

Node Fisherman Eight

In order to tie a fishing line to the hook using the Fisherman's G8 node, do the following:

  • Take the end of the fishing line through the ear of the hook, turn it around Zevya and start the end of the fishing line again in the Hook ear, the hook appears as it were in the loop, which is not tightened yet.
  • We make the turn of the end of the fishing line around the main fishing line, and then skip the end of the fishing line through the loop, which was formed below the hook's ear.
  • Tighten the node.

Node Canadian eight

The Canadian G8 node is simple in the tie, ensures the gap strength just below 90%.

Node Canadian eight

To bind the line to the hook using the Canadian Eight node, do the following:

  • Take the end of the fishing line through the hook ear, turn it around Zevya and start the end of the fishing line between the hook and the fishing line, so that it turns out a self-timing loop, which is not tightened yet.
  • We skip the end of the fishing line through the resulting loop.
  • Tighten the node.

Canadian and fishing eight

Salmon knot

The salmon node refers to a sophisticated fishing unit, but at the same time very reliable and durable, suitable for all types of fishing racks, of various diameters. The salmon assembly ensures the tensile strength of a little more than 90%. The node received its name for the fact that it was originally applied to catch such a large and strongly resisting fish as salmon.

Salmon knot

An interesting feature of the salmon node is that the salmon knot is binding not at the eye, and for the Tsevier hook, which makes such a connection of the hook with a fishing line is stronger.

To bind the line to the hook using the Canadian Eight node, do the following:

  • Take the end of the fishing line through the hook ear.
  • The end of the fishing line make two turns around the main fishing line.
  • We skip the end of the fishing line between the first twist and the hook ear.
  • Lower the entire knot through the Hook Hook down on the Tsevier.
  • Tighten the node.

Turtle knot

The turtle knot is used in large fish fishing. It is best to use it for tosing a hook to a thick fishing line or even the twine, use it with a thin fishing line is not recommended, tied on it, it is inclined to self-disconnecting. The strength of the node on the gap is about 80%.

Turtle knot

In order to tie a fishing line to a hook with a turtle knot, do the following:

  • Take a fishing line in the hook ear.
  • We make a loop and tie a simple single node.
  • Take a hook in the loop.
  • Tighten the fishing line for both ends.

California Knot

California node is one of the youngest among marine and fishing units, it was invented by American fishermen from California about 1980-1985. California node is suitable for all types of small and medium diameters. The strength of the node on the gap is about 95% of the explosive strength of the fishing strength. According to the method of tying, it is very similar to the Palomar knot, but unlike him, the knot is not tightened on the main fishing line, but on the Tsevier hook below the ear.

California Knot

In order to tie a fishing line with the help of a California node, do the following:

  • The end of the fishing line is folded in half and do a dual fishing line in the hook ear
  • By the end of the envelope of the main fishing line and in the resulting loop, we have done a double end of the fishing line
  • We skip the hook between the dual-end logs and tighten.

Bloodered (Double Loop Clinch Knot)

The bloody exposed node is recommended to use only when the hook is tied to the fine monoins, it should not be used with wicker wood. The strength of the node is about 80%.

bloody exposed

In order to bind the line to the hook with a bloody exposed node, do the following:

  • The end of the fishing line twice skip through the hook ear
  • Make 5-7 turns ending line around the main fishing line
  • We skip the end of the fishing line through the original loop, and then through the last loop
  • Tighten the knot

Akuliy Knot

Akuliya Knot - the original knot with self-tight loop, is characterized by high strength. The strength of the node on the gap is about 95%.

Akuliy Knot

In order to link the line to the hook with a sharp node, do the following:

  • The end of the fishing line is made in the hook ear
  • I pull the end of the fishing line up, turn around the main fishing line, making a small loop that do not delay
  • We make three or four turns of the end of the fishing line around the double main fishing line, towards the hook ear
  • Take a free end of the fishing line in the upper immeasured loop
  • Tighten the knot

Tuntu knot

The tuntz node is considered one of the most complicated nodes from the point of view of tying, but at the same time one of the strongest. The strength of the tuna node on the gap is 95% of the explosive strength of the fishing strength. From other fishing units, it is distinguished by the fact that there are two hinges and two hinges at the same time.

Tuntu knot

In order to link the line to the hook with a sharp node, do the following:

  • The end of the fishing line is made in the hook ear
  • The end of the fishing line makes four turns around the cable hook
  • Take the end of the fishing line through the ear of the hook in the opposite direction
  • Radia rack around Zevia raise upstairs through the ear of the hook on the main line
  • Moching the line, tighten the knot

SANOE MAN LOOP KNOT

Canoe MAN Loop Fishing Knot is a relatively simple and compact node. Suitable for any type of fishing line. The strength of the node for the monoleski is about 98%, for flucerboon and braided about 80%. The node requires the correct tightening, with the wrong tightening it is crumpled.

KANOE MAN LOOP.

In order to tie a line to the hook using the Canoe Man Loop node, do the following:

  • Make two float on the fishing line.
  • Rear loop (far from the end of the fishing line) Grind to the front.
  • In the extension loop, the end of the fishing line.
  • Tighten the node to do this, pull the hook and the main fishing line, holding the loop so that they save their shape.

Cat noda foot

A knot of a feline foot is well suited for tosing a hook to a wicker fishing line of any diameter. The strength of the cat's foot node is 80-85% of the explosive strength of the fishing strength.

In order to tie a fishing line to a hook with a node of a feline foot, do the following:

  • Fold the fishing line twice and grind through the hook ear
  • The resulting loop is thrown on the hook and 3-5 times turn around clockwise around the hook
  • Wetting the line and tighten the knot

Knot Orvis Knot.

KNOT knot Knot is a simple and reliable way to tie a hook to the fishing line offered by the world-famous ORVIS company. The node is suitable for use with any type of fishing. The strength of the assembly on the gap is about 95% of the explosive strength of the fishing strength.

Node Orvis

In order to tie a line to the hook using the ORVIS KNOT node, do the following:

  • Grind the line in the hook ear and spend the end of the fishing line under the main fishing line.
  • Grind the line in the resulting loop near the hook.
  • Make three turns of the free end of the fishing line around the resulting new loop.
  • Moisten the node and gently tighten the node to the hook's eye.

Eugene node

Eugene node is a simple and very reliable fishing site that is suitable for tosing a hook to a fishing line of any type. The strength of the Eugene node on the gap is up to 98% of the explosive strength of the fishing strength.

Eugene node

To bind the line to the hook with the Eugene node, follow these steps:

  • Credit the fishing line through the hook ear and fold it twice in order to form a loop
  • Make the resulting loop 3-4 turns around the main fishing line
  • Free end of the fishing line in the resulting loop
  • Tighten the node, pre-sinking the fishing line, cut the extra end

Knot Rapala Knot

The Rapala KNOT node is recommended for applying the world-famous Finnish company Rapala. The node is used primarily for tied to the fiber of wobblers and glitter, but can be used to tie any bait and hooks. The advantage of the node is that it allows you to keep the free bait game, while ensuring reliable connection strength. The Rapala knot node can be used both with a wicker fishing line and with mono elec. The strength of the node is 90% of the explosive strength of the fishing strength.

Node Rapala.

To bind the line to the hook using the Rapala knot node, do the following:

  • Make a simple knot on the line without tightening it to the end.
  • Grind the fishing line through the hook ear and thread it through a simple knot
  • Make 4-5 revolutions with a free end of the fishing line around the main fishing line.
  • Return the free end of the fishing line back and do it through a simple knot and immediately do it through the resulting loop.
  • Tighten the knot

How to tie a fishing line to the hook without a ear

Hooks without a ears are a special type of fishing hook, such hooks have instead of a ring for tosing the fishing line a special blade. Beginner fishermen most often avoid hooks with a shovel instead of a ear, because it seems to them that when tieding the fishing line to such a hook, the connection of the fishing line and the hook will turn out not strong and not reliable. In fact, tie a hook without a earcker is not more difficult than an ordinary hook, but when using the correct type of node, the connection will be no less strong and reliable than that of the hook with an eye.

Hook with shovel

When using hooks with a spatula instead of a ear, there are a number of nuances of their use:

  • The hook with a spatula is better suited for catching careful fish, where a neat presentation of fish bait is required.
  • The hook node with a spatula is placed on the Tsevier and therefore it turns out more compact.
  • When tying a hook without a ears to the fishing line, the hook and the fishing line are located in a straight line.
  • The hooks with a spatula are better not to use when catching a strong fish, when the fish jerks, the knot can slide and damage, which will lead to the loss of trophy.
  • The node on the minor hook is easier to tie, if it is a hook with a spatula, a fisherman will not have to be traveled through a very small ear.
  • The numbering of hook sizes with a spatula fully corresponds to the numbering of the sizes of ordinary hooks with an eye.
  • Hooks without an ears of the desired size and the form is much more difficult to find on sale.
  • When buying hooks in the store, you should choose only high-quality hooks of well-known firms.

Step knot

A stepped knot is designed to tie the fishing line to the hook without a ear. The strength of the node is 90-95%. The node is well suited for monofilament and fluorocarbon wood, a little worse suitable for a wicker fishing line. Bad is combined with very thick fishing racks.

Step knot

In order to link the line to the hook with a step knot, do the following:

  • Free end of the fishing line we put along the zevya hook to form a loop
  • Making 2 turns around a hook and one side of the loop, the coils are put down in the direction of the hook bend
  • Then make another 3-5 revolutions around the zevny hook and both sides of the loop
  • Take the end of the fishing line in the loop and tighten

Spiral knot dumhof

The easiest knot for fastening the fishing line to the hook with a spatula. It is better suited for large hooks, on small hooks with a short priest it is more complicated. The strength of the dumhof node is 75-80% of the explosive strength of the fishing strength.

Node dumhof

To bind the line to the hook using the dumhof node, do the following:

  • Form the loop on the fishing line and attach it to the hook.
  • Make 4-7 revolutions with a free end of a fishing line around the loop and zevia, moving along the goal in the direction of the hook bend, lay the coils one to one so that they do not touch each other and do not overturn.
  • Curtain the free end of the fishing line through the loop, slide the knot to the hook shovel, moisten the line and tighten the knot tightly.

Snell node

The Snell node can be used both with a crochet without a easter, and to tie a few hooks with an ear to one leash. The strength of the SNELL node is 90% of the explosive strength of the fishing strength.

Snell node

To bind the line to the hook using the Snell node, follow these steps:

  • Make a big loop at the end of the fishing line, which should shine freely through the bend of the hook.
  • Make 7-8 curvatures around the zevé hook, the loop size will decrease with each turn.
  • Slide the knot along the goal towards the blade, wet the fishing line and finally tighten the knot, holding both ends of the fishing line.

You may be interested:

Bind the hook the most simple, but at the same time, the reliable way is not such a slight task. Especially since the size and construction of the fastening ears of the accessory differ in their own image and the formation method. Special fishing units for hooks are diverse and is connected not only with their design features, but also with the terms of fishing for which a mold is formed. After all, for an attractive and natural supply of bait, it is necessary to position the bait in the water horizon, and the hook must help it properly tied on the fishing hook.

It is also known that the leaks are rather fragile and gentle structures of the material that is afraid of serious deformations, as a result of which this element of the equipment loses a significant part of its strength characteristics. Consequently, the scheme for which the accessory will be attached to the cord must take into account this important aspect in fishing.

To the attention of the reader in this article will be presented the main options for mating hooks to the fishing line. Options will take into account the constructive feature of the fastening ear of the leather accessory, and the fisherman, looking at the proposed methods of tying, will be able to determine for itself the appropriate method of fastening and spending the skill at home the execution of the nodule to apply skills in practice, in real fishing conditions.

How to tie a hook to the fishing line

The quality of the connective operation is affected by the cord material and the shape of the hook interconnect element. To correctly bind the hook to the fishing line, you need to have the concept of its structural structure, and in particular, diameter, and such material properties such as rigidity and limiting discontinuity load. Nylon, fluorocarbonic and woven fishing line require completely different approaches to binding, which seriously affects the final working state of the nodule. The same type of mating can significantly differ reliability for different material of the fishing line.

For example, the reliability of the design on wicker woods can be expressed by the use of exactly the same connector on the nylon cord with the relief of the element, which leads to further self-discrimination of the nodule and the loss of trophy. The tightening force of mating also has a significant impact on the final result of the connection. After all, nylon and fluorocarbon as a result of friction, and at the time of the tightening it goes to the maximum level, is subject to fagots, which is fraught with a complete loss of strength.

Important! To minimize this negative when wearing the consequences, the material before tightening is mandatory wetted that it is convenient to do even saliva.

Weavers are afraid in the dynamics nodules, exposed to abrasion and subsequent fiber rupture in the workplaces of friction. Therefore, self-tight compound methods for such types of cords are not always applicable, especially if dimensional and large and large in the throat of trophies are planned. The essence of all crochet methods is based on minimizing the deformation of the structure of the cord material, as a result of which the nodules are formed from a plurality of loops and rings that duplicate each other. This duplication prevents self-reliance and sending the nodule, significantly increasing the strength and reliability of the connection.

Important! To make connections of additional strength characteristics, the body of the formed node can be additionally calcined.

Next, we turn to direct consideration of the connectors for various types of fastening elements of the hook applied in the equipment.

Hook nodes with an eye

This type of fishing accessory has a fastener ear formed by a ring of a ring, a little large in diameter than the thickness of the wire hook itself. Before knitting fishing hooks draw attention to the ring, which can be soldered with the priest, and can simply be pressed without a deaf connection to the hook wire. Non-connected vglukhau with the Tsevian ring requires a visual inspection on the absence of a burr on a wire slice. Speeded accessory options after inspection and eliminate the proper, in the presence of sharp influxers and heat treatment faces, you can connect with cords by any of the famous fisherman of the methods of the most popular, of which further speech will go.

Grinner.

High-strength knot, the reliability of which reaches a value of 85% of the initial discontinuous load of the fishing load. Effective nodules to tie a hook on a thin monophile fishing line.

I have traveled twice the tip of the cord through the mounting ring, it is cut in 12-15 cm to wind around Zevya five, seven times and the remaining end felt in the loop, in the future exercising tightening. Connecting monophile is subjected to compulsory wetting.

Spindle

One of the high-strength methods of compounds, which is suitable for monophyl, fluorocarbonic and wicker forests of small dimmeters. The final tensile strength with competent viscosity technology reaches 85% guaranteed.

The tip of the cord is fastened into the mounting ring and bended to the loop so that the remaining tail allowed to wrap the wrapped loop with the hook of at least five times. After turnover, the end of the fishing line is drawn into the loop and slowly pin the moistened twist with a uniform force.

Uni

This Connect method is practiced only for monophilic fishing oils in small and medium-sized diameters. Connection strength is close to 80% of the initial state of the cord.

He traveled to the fishing line into the fastening ear of the hook, its free cut in the loop, pressing her fingers to the main cord. Further, the end of the loop is wrapped five, six times folded threads and make a free tail of the fishing line in a previously formed loop. When tightening the ring rings tightly pressed the hook's eye.

How to tie a hook with a deaf node

Bring a hook to a very fine basis with a deaf node. In the fishermen community, this connection method is pleased with the easiest node. And no wonder, because the technology of its execution is one of the most elementary compared to other mating. The minimum deformations of the material allow fastening with the loss of monophile discontinuous loads of only ten percent.

Less are twice and passed into the fastening ring of the accessory. Next, the loop missed to the ear is traded behind the hook and tightened, clamping the resulting mating to a dense end state.

Shone knot

Strong knitting for wicker cords. The synthetic bases knit with a bayonet nodule is not recommended due to the fact that especially on strong currents occasion of the material and the subsequent self-disconnection of the compound occurs. Reliability on braids reaches 90% of the initial limits to the rupture of loads.

The tail of the Plenty stretches into the ring of the hook and turning around the zevary, gets at the resulting loop. Next, with a free tip, they repeat exactly the same operation, making the second stretcher wrapped around the rod of the tail, with a plant in the loop and produce the final tightening.

How to knit hooks fisherman eight

Quickly bind the fishing line to the hook allows the method of fisherman eight. To the initial rupture, this mating retains almost 90% of the initial strength. The method is suitable for the synthetic materials of the forest, different in their thicknesses.

Keeping the fishing line in the Ushko, her tip is enveloped around the Tsevaya accessory and reappear into the fastener ring. The subsequent operation is the envelope with a free tail already the basics of the cord over the fastener ear and the subsequent plant of the cut in the previously obtained ring at the laster hook. Subsequently, it remains to tighten the twist, pre-mocked the fibers to prevent the material being prevention.

Canadian eight

You can bind the hook on the fishing rod with synthetic cords with similar, with the above-described method, also uncomplicated by the Canadian eight. Its ultimate strength is slightly lower than the ninety percent, which is a good indicator in relations with the simple in the mating technology and the smallest deformation consequences for nylon threads.

Threads are fought in the fastening element of the hook and bend, turning the fishing line along the rod of the accessory. In the resulting loop, the tip of the nylon thread is invented and not tightening mating, repeated inwing the second time. After the second stretching of the cord, the connecting element is tightened, getting a reliable and simple node.

Salmon knot

Comprehensive compared to other methods, but the result of reliability on the discontinuous load often exceeds 90 percent, and on the use of salmon nodules fit under all types of fishing line and their diameters, being a universal option, which gives the background of fisherman to the mandatory mastering of such a connection technique.

Knitting the hook starts from the dressing in the ears of the single end of the forests, which enhance the end of the continuation of the thread just once. Next is invested in the tip of the thread into the resulting ring near the hook and subsequently reset the formed nodules from the main thread on the Tsevier hook and tighten the connection.

Gripping knot

Quickly knitting technology is absolutely for any kinds of fishing line. Of the disadvantages of the method, the high ability to deform the cord material is noted, which reduces the discontinuous load to low sixty percent of the initial strength.

After stringing the accessory on the thread, wind the main cord is five-seven wits of the final tail and make a free cut in the loop formed at the base of the hook. After these manipulations, it remains to moisten the resulting cleaner and delay the nodule.

Turtle knot

The technology presented is more effective for wicker oils of small and medium diameters. On the synthetic, the mating does not hold, relaxing in the process of operation, increasing the probability of self-relief. The final discontinuous characteristic of the material connected with hooks is reduced to 80%.

Looking at the main fishing line in the fastening ring of the skilled accessory, make a loop and produce a turnover of the free end of the cord around his priest. Next, the tail threads are in the ear obtained from the previous bend, and at the end of the finished fisherman's technology only remains to tighten the knot, tightening it to the fastener element of the hook.

Bloody

In fishing practice there are several similar ones of the method of performing methods for the mating of this nodule. But we will present the reader a classic connect method, which subsequently obtaining a sustainable skill can be easily finalized under convenient variations.

The classic knives from dressing the rings on the cord and turnover of three, seven turns of the free tail of the thread around the base of the fishing line. At the end, the free tail is made in a double loop formed at the very beginning of the mating process at the base of the hook, and tighten the twist. The twist strength is not lower than 80% of the holistic material.

California Knot

The most durable of fishing nodes. Suitable for all types of fishing lines of small and medium diameters. At the end of the compound, the discontinuous load is saved within 95%.

To form a twist, the hooks must have an increased diameter of the connecting rug, since the fastener for the implementation of the connection is folded and in the ear twice. Then the forest folded into the loop turn around the main threads and passed into the obtained Ushko. The resulting mating is crumbling behind the hook and tighten the nodules to the limit.

Locked bloody

You can bind the hook and one of the varieties of the bloody nodule by a locked option. The tensile strength of this twist will be 80% of the initial data. The compound method allows you to knit different types of forests, including metal leashes, with a diameter of up to 0.5 mm. In the fastening element, they skip the thread twice, making five, seats around its base. Then they encourage the end near the initially made double loop at the very beginning next to the ear and once again draw the tip of the thread already as a result of these actions the loop the resulting loop and tighten the entire formed nodule.

Clinch bloody node

The strength of this variety of the bloody below, presented above the variation and is only 70%. The connection is practical in murmur mordes on thin and medium monofilated fishing fishing fishways.

Twice the extension forest in the fastener of the hook winds around the base for at least five times and invested the free end of the monofilament into the resulting clearance at the ring. After that, the fisherman remains only to pull the assembly, mixing it to reduce friction for tightness.

Clinch Superior, Improved Clinch

Curb variation for synthetic forest. Braided threads under the technology of mating are not suitable due to the strong deformation of the fiber. Knit an improved clinch monophile to 0.4 mm in diameter.

Important! Cline strength improved in order is 98%, which is one of the highest indicators in compounds.

The thread rolled into the ring is wound on the basis of the cord seven times, the winning tip in the loop formed near the connecting ear, and again they felt in the reverse loop resulting as a result of the bend. Next smoeming material, make the final tightening.

Akuliy Knot

Developed special node for a hook with an ear as well as the previous connection leaves the material to the gap strength of about 95%. Aculiy is suitable for connecting synthetic materials.

Threading to fasten a 15-18 cm on fastening is twice as well, wrapping four times around the main fishing line and distributing the turns to the zevaya hook. Next, the tail in the ear, obtained from the bend before turning, and tighten the twist, tightening the hook to the fastening element.

Tuntu knot

One of the most complicated technologies, but at the same time and the most durable, reaching the limit in 95% of the initial rupture of the material. The technique for mounting synthetic fishing rods is intended.

The extension forest turns around the priest four times, returning the tip in the Ushko. The resulting plexus is raised from the comma through the fastener ring on the folded fishing line and smoeming the material, tighten until it stops.

Knitting fishing hooks without a ears

Nodes for hooks without a ears are no less diverse in their technologies. Their distinctive feature is a more complex operation of operations and scrupulous finite quality control. A constructive feature of the deck accessory is a fastener blade, instead of a ring, which is sometimes confused by novice fishermen when using these types of hooks due to the seeming complexity of the installation. But in fact, this process can be easily mastered by eating, having studied the following examples of compounds.

Step knot

It is not easy to knit the fishing hook according to this technology, but it is worth learn, due to the high strength of the mating, which it reaches an order of 90-95%. Monophil and fluorocarbon are suitable for more efficient methods than wicker basics.

The cut of the fishing line is folded with the Tsev, directing the forest towards the bend of the hook, and turn the Tsevier two turns of the thread. Then bend the left continuation of the forest to the coats and again turn the tail around the rod at least three times. Next, the tip bend and turn around twice twice around the twist, directing the tail in the resulting loop. After the formation of the navigation, the twist is tightened.

Spiral knot dumhof

Method for wicker threads, discontinuous ability after the implementation of which remains at a level of 95%. The pre-moistened shoulder is twice and applying the cord output to the end of the Tsevaya chants the pin 4-6 with turns. The free tip is passed into the loop and tightly clamp a twist.

Universal knots

In continuation of the topic, consider the technology of mating universal nodes, which help to bind the hook, swivel with a buckle and any other artificial bait used by fisherman in the process of catering. These types of compound technologies are particularly popular in the fishing environment due to their versatility and relative ease of execution, in what can be seen by studying the schemes of their execution in more detail.

Palomar

The Palomar node can be rightfully called the most popular and most simple performed. Knit and hooks and blacks, and the installation of elements of various fishing equipment. It is worth noting only inconvenience when using fasteners in the form of rings with small diameters. Monophilic leaks - the most suitable option for technology, retaining 90% of the initial strength.

Having gathered twice the material, permeate the fastener ring and form a classic knot, navigating not one, and two or three twists. In the resulting loop, Tsevier hooks fasten and tighten the resulting twist.

River

The method is suitable for both the easter and the blade of the leather accessory. Despite the low discontinuous load after tightening, only 70%, fishermen respect this technique for versatility and simplicity when installing with wicker wood. Folded twice the threads are applied to the goal, wrapping 4-5 times the tip of the pin and the applied cord itself. With the last turnover, the tail is filled into the loop obtained with the initial formation and finally tighten the nodule.

Cat foot

A good node for the hook when connecting with any diameter of a wicker fishing line. The final discontinuous load remains within 80-85%.

The shoulder is twice and ingested in the hook fastening ring. The resulting loop is thrown on the Tsevier hook and three, they turn around the hook clockwise five times. The remaining tail is drawn in the loop, obtained while folding twice the threads, and inamour, the twist is tightened to the stop.

Canoe Man.

Universal knitting for any types of cords. But more efficient for the monophilic fishing line with 95% of the remaining strength, which for the plen and fluorocarbon rarely reaches an indicator of 80%. Reloing the hook properly only when the set of competent tightening the nodule is observed, otherwise it will independently encourage.

On the cord there are two wicked, passing one to another. The remaining tail threads are passed into the mounting ring of the accessory. Next, the tip of the thread is discharged into a half-way, which was previously skipped through the other. As a result, all the plexus is tightened into a compact and tight node.

Snell.

The discontinuous strength remains within 90%. You can connect different materials with small diameters in the installation. With insignificant modification of the method of mating, it is possible to bind the hook without a ear.

Throwing a 10 cm long tilt in the fastening hole is bent into the loop and return back, stretching again through the hole of the ear. Subsequently, there are 5-7 turns with a thread around the comma with a thread and bending the residue of the thread for bending the hook is tightened by a twist.

ORVIS KNOT.

A robust knitting of 95% of the initial discontinuous load, with which you can connect with the hooks absolutely any type of fishing line. With a small margin of the material, the thread tilt is inserted into the fastener hole, a single scrolling ending around the main forest. In the penetration resulting as a result of this manipulation, the remaining tail is launched, which three times turn around around the event that has just received and produce uniformly tightening.

Duncan Loop.

The presented technology is used to fasten the hooks with soft forests, where the strength of the nylon material on the gap as a result of the connection is reached to 85-90%.

The cut of the fishing line at 15 cm is inserted into the hole of the fastener and around the folded twice, above the Tsevaya fishing line produce four, five revolutions. After this manipulation, the end of the threads are inserted into the loop resulting as a result of folding and the nodule formed on the cord is made.

Eugene.

This type of compound refers to rather reliable methods, which confirms the high percentage of residual discontinuous load at the connection site, determined within 95-97%. Also, this type of connection is classified as universal, because the monophile and whites are tied with the same reliability. We bind the hook to the fishing line to fasten the cut of the cord of 10-12 cm. From the stock forming the loop and wind the formation three times the main fishing line. The remaining free tail is in a looping and produce uniform tightening, without forgetting to pre-mix the twist.

RAPALA KNOT.

Initially, the method was developed under the installation of spinning bait, such as wobblers and black, but with the time of the fishermen successfully transformed the methods for the needs of other compounds, which is successfully applied in practice and allows you to reliably bind the hook. Ninety percent of the discontinuous load on any material is added by the method of versatility.

Rapala

Knot Rapala

Initially, the usual, the so-called cord nodule, the end of which is focused in the Hook UCHO. Next, the tip is inserted into the loop-based on the basis and navigate. After this manipulation, the free end is returned to the hook and felt in a non-tightened loop. Now the twist is ready for tightening, which is worth making a smooth movement.

Fastening a few hooks

Often, fishing conditions require several hooks in the installation at the same time. Their competent fixation in the equipment is capable of performing the methods of compounds used for hooks with terminating in the form of a blade. In addition, the fishermen developed both a specialized methodology for a connection, the basis for which the variation was borrowed from the technology of mounting the boilers. It is about her who will go our further conversation.

KNOT LESS.

Method for wicker species Forest of various diameters, with a residual gap at least 90%.

Throwing into the fastener of the thread is applied to the Tsevia of the Lovek tool. The second tip of the thread turns 5-7 times around the commune and the thread attached to it. The same end of the cord is stretched again in the Hook ear and clamp a ligament. Knit the fishing line on the hook pre-moistened with water, which increases the final strength to previously agreed percent.

How to bind the hook to the fishing line? Such a question will seem not difficult to fisherman. But the usual types of nodes for tosing a hook to the fishing line are often not suitable under certain conditions.

How to bind the hook to the fishing line

So it is necessary to remember that wicker cords, a monofiller fishing line, fluorocarboons require a different approach when tied to hook. Also, the diameter of the section affects the working state of the node on the hook. And what, talk about different hooks: with an eye, without a ears with a shovel, offset, double, triple, various spinning bait and so on.

Below are the most popular ways to bind the hook to the fishing line in the schemes and pictures describing:

Content:

  1. Shark's
  2. Spindle
  3. Deaf (birk)
  4. Gripping (Clinch or Superior Clinch)
  5. Whip (leashed)
  6. Bloody
  7. Salmon
  8. Orvis.
  9. Progib
  10. Palomarian
  11. Stage
  12. Trailing (double clinch)
  13. Thrombonic loop
  14. Tunty
  15. Union Union
  16. Howmer
  17. Turtle (Tourla)

Shark's

How to bind the hook to the fishing line step by step guide

This complex node has a large traction strength and is used to fasten the hooks on synthetic fishing rods.

How to bind the hook to the fishing line step by step

The sequence of the tie of the sharp node

  1. Relief through the hook ring.
  2. The running end of the fishing line make five to six revolutions around the indigenous and running ends. Take the line in the upper loop.
  3. Match node, bring closer and tighten the loops.

Spindle

What node to tie a hook to the fishing line

A feature of this node is its knitting of the hook rod. This is a fairly reliable unpretentious node, well withstanding traction load. You can knit this node on any type of synthetic fishing line, and it does not allow its scaling.

What node to tie a hook to the fishing line

Testing sequence node spindle

  1. Take a running end in a hook ring and shape a flat loop along a row.
  2. Make four turns of the running end around the rod and loop. Take the running end to the bottom of the loop.
  3. Mix the water line and gently tighten the knot.

Deaf (birk)

How to tie a hook to the main fishing line

This node is designed for rapidly tied brilliance, loaded and in some cases of fishing hooks. The positive property of such a node is the speed of tying and unleashing when replacing the brilliance and maintaining the integrity of the fishing line. It is well performed on cotton and polyamide fishing racks or soft wire.

How to tie a hook to the main fishing line

Dehydrated node tie sequence

  1. To form a flat loop and spend it through the weight of the sore (hook).
  2. Lower the loop down and spend the load through it (hook).
  3. Gently tighten the knot.

Gripping (Clinch or Superior Clinch)

How to tie a fishing line to the hook with an eye

This simple node is used to bind synthetic cables, tied hooks with a ring and spatula, brilliance or swivel. It is well holding any kinds of fishing racks with a diameter of up to 1 mm and is not subject to self-breaking during loads. By the method of tying, the gripping knot is half a snake node.

How to tie a fishing line to the hook with an eye

Gripping knot tie sequence

  1. Returning the end of the fishing line through the hook ring and bottom to make five or seven revolutions around the root end (if the fishing line is thick, it is better to make four turns).
  2. Conduct the running end to the first twist and turn to the loop next to the ring.
  3. Conduct the running end in a loop located along the root end.
  4. Rapid and tighten the loops, trim the end.

Whip (leashed)

How to tie a hook with a spatula for a fishing line

One of the oldest nodes used to tie hooks (including without lylish), loaded.

How to tie a hook with a spatula for a fishing line

Screw node tying sequence

  1. Shape open loop along row hook.
  2. Cutting the running end around the loop and rod hook 7-8 times.
  3. Take the end of the end in the loop and tighten it by pulling the root end.
  4. Maminating the water line, fix the node, pulling the root and running end at the same time.

Bloody

The bloody node is included in the group of simple, frequently used knots. It is believed that he received his unusual name during the time of the sailing fleet, where such a node was tied at the ends of the woven - "cats", which was punished by sailors at military courts.

Nodes during the impact burst the skin can be punishable to blood. In the fisheries, the bloody node is used to tie hooks, carbines, loaded, and notes, etc. Depending on the tasks being performed, various variants of the Blood Node mating can be applied.

In this case, we will consider the option of tying a leash to the hook. This method of mating is often used when equipping tiers and other multicreetic gears.

How to tie a hook to the fishing line

Blood node tying sequence

  1. Skip the end end through the ring, lowering along the rod hook, make a wide turn around it.
  2. Make one more turn, capturing the root end and hook rod.
  3. Conduct a running end through the formed loops.
  4. Pulling for both ends, tighten the node.

Salmon

The salmon node is simple in the tying, but has one of the highest rates on the strength of the traction load. The positive property of this node is also its versatility - it is perfectly kept on both cotton and synthetic monofilic and wicker fishing woods.

how to quickly tie a hook to the fishing line

Sweese Testing Sequence

  1. Take the running end of the fishing line in the ring and make two turns from the bottom up around the root end. The end end is lowered down and, starting up for the root end, spend the fishing line into the bottom loop.
  2. Gently lower the knot on the hook rod.
  3. Tighten the knot.

Orvis.

How to bind a fishing hook to a fishing hook

This small well-holding load knot for fastening the hook to all types of synthetic oil was designed by Larry Becker and named the company who has conducted a competition for the best fishing unit. Orvis according to characteristics is similar to the assemblies, trailing, Palomar and works well on all types of fishing line.

How to bind a fishing hook to a fishing hook

Testing sequence of the Alvis node

  1. Reline the line through the hook ring and spend under the root end.
  2. Conduct the progress end in the resulting loop.
  3. Make three turns with a running end around the outer edge of the new loop.
  4. Mix the fishing line and tighten the knot.

Progib

How to tie a hook without an ear

This node is designed to tie hooks without a ring and has a second name - a shell node. Knitting a knot is performed on a hook stem using any type of synthetic fishing line.

How to tie a hook without an ear

Test Sequence Prog Bib

  1. Crow a running end along the row down and make six revolutions around the rod and fishing line.
  2. Take the running end to the formed loops. By pulling the chassis and root ends, gently tighten the knot.

Palomarian

How to tie offset hook to the fishing line

Palomarian has a second name - California node. This is one of the uncomplicated knots, but keeps loads very well. Its main purpose is the attachment of the end elements of the equipment - fasteners, offset hooks, loaded. This node is well suited for poly - and monofilament fishing rods.

How to tie offset hook to the fishing line

Pillar Arian Node Testing Sequence

  1. Bending the running end of the fishing line in half, shape a flat loop.
  2. Cut the loop through the hook ring.
  3. A bent running end to tie a simple knot so that the ring is inside the node.
  4. Conduct a hook through a simple loop (loaded).
  5. Moisten the water assembly and, without twisting the dual areas of the fishing line, tighten the node.

Stage

This reliable fisherman node is most often used when connecting a leash with a crochet. It is especially indispensable when fixing hooks without a ear.

how to bind the hook to the fishing line and leash

Step knot tie sequence

  1. The end end to fold parallel to the hook rod in a flat loop.
  2. The end end of the fishing line to circle 2-3 times from above down around the rod hook and root end of the fishing line.
  3. Continue the winding of the running end around the rod and flat loop.
  4. Take the running end in a flat loop.
  5. Gently tighten the knot.

Trailing (double clinch)

A sufficiently reliable, well-holding load knot for fastening hooks, loaded to any monophilic and wicker fishing line.

how to bind the load and hook to the fishing line

Traillin Node Testing Sequence

  1. Twice spend a chassis end through the hook ring.
  2. Make five revolutions around the root end in the bottom upward direction.
  3. Skip the running end of the fishing line through a double loop located near the ring.
  4. Tighten the node and trim the end of the fishing line, leaving 3-4 mm.

Thrombonic loop

How to firmly bind the hook to the fishing line

This node is used to tie hooks with a ring and with a spatula. It reliably holds on natural and synthetic monoles and braid.

How to firmly bind the hook to the fishing line

Treating sequence of trombone loop

  1. To form an open loop with a running end, retreating 10-15 cm from the edge. Attach the hook to the middle of the loop, while the rod must be parallel to the root end.
  2. Make the running end of 8-10 shlags around the rod hook and root end.
  3. Turn the running end through the loop.
  4. Maminating the water to the forest, delay the node.

Tunty

How to bind the hook to the fishing line scheme photo

A fairly interesting node used to tie a synthetic fishing line to hooks, loads, carbuses, etc. The tunzoy node is not so often used, although it is characterized by great reliability and keeps the load well, which is associated with a sufficiently complex knot knitting. Some fishermen to facilitate mating use various wires from the wire bent undercover.

How to bind the hook to the fishing line scheme photo

Tuning knot tie sequence

  1. Conduct a running end through the ring. Make three widgets around the rod and spend again through the ring (do not delay the rings).
  2. Display the stroke of the fishing line through the ring.
  3. I pull in the root and chassis of the line, tighten the knot.

Union Union

How to bind the hook to the flider chamber

This unusual node was created relatively recently, but already gained popularity among fishery lovers. His uniqueness is manifested even in a large number of titles. Initially, he was called in honor of his creator of Norman Duncan, often called the name of the popularizer of the writer Danava.

It is known in the name Greenner, but most often it is called the university knot, which is a reduction from the word universal. This name reflects the characteristics of the node. Uni successfully used for fastening hooks and loaded, for connecting two fishing fishing, including different thicknesses.

The node keeps the load well, not subject to self-probe. For the tying of this node, monophilic, flincarbon and wicker fishing rods are suitable.

How to bind the hook to the flider chamber

Sequence of tying node uni

  1. Conduct the end end through the ring and form a full loop out of it.
  2. Wrap the running end of the fishing line around the root end and the inside of the loop 5 times.
  3. Moisten, carefully cut the loop, tighten the knot, pull the knot to the hook ring and cut off the surplus of the fishing line.
  4. When the node is used to connect two fishing line, the nodes tie around the root ends of opposite fishing line.

Howmer

How best to bind the hook to the fishing line

Durable knot for tied hooks, loads, swellers, feeders. It is best to use it with monophilic forests with a diameter of up to 0.4 mm. When used on braided and fluoroperbone fishing oil, its characteristics deteriorate significantly.

How best to bind the hook to the fishing line

Hawmer node tying sequence

  1. Take the end end in the ring of the hook and form a simple loop, leaving a free 10-20 cm.
  2. To form 5-6 challenges at the root end.
  3. Take the running end in a previously shaped simple knot.
  4. Match and tighten the node.

Turtle (Tourla)

How to just bind the hook to the fishing line

Non-flat, sparing logging knot for tied hooks, loaded, leashes. Such a node is inclined to self-disconnecting on synthetic woods, so wicker fishing rods are better suitable for the turtle node.

How to just bind the hook to the fishing line

Testing sequence

  1. Returning the end of the fishing line in the ring and form a closed loop. Cut the chassis around the root end of the fishing line and make a closed loop over the rod.
  2. Take a hook in the loop.
  3. Tighten the knot by cutting the end of the forest.

How to tie a hook to the fishing line video

How to bind the hook to the fishing line video

How to tie a hook, easy and fast video

The standard node among fishermen is the most popular knot for tosing hooks with a spatula. Almost all fishermen from this node began their fishing path, so this video will most use novice fishermen. The main advantages of this node are simplicity of its knitting and strength of more than 90%.

Best node Caid loop video

How to bind two hooks so that they are not confused | Podolsk fork video

Very simple and ingenious way to bind two hooks, so that they are not confused among themselves in the process of fishing! In the people, this installation is called - "Podolsk fork".

Добавить комментарий